Customer question from Dec 7, 2015, 7:59:09 PM
symptoms
- N/A
Description
Engine in limpmode. Cannot reset fault
Answer from Dec 8, 2015, 12:02:44 PM
Hallo,
thank you for your request on autoaid.
The following information reached us:
A blind diagnosis isn't easy.
The DTC P2453 in the Engine Control Module says, that there is a malfunction of the Differential Pressure Sensor of the Diesel Particulate Filter.
You cannot clear the fault until the problem is fixed.
Possible causes are a faulty or defective Differential Pressure Sensor or a broken cable, a loose contact or poor plug connections as well as corroded connections.
In some cases a software update of the engine control module of the Insignia could solve the problem.
But first I would check the Differential Pressure Sensor.
I hope this information will help you to solve your problem. If you have further questions, just reply to this post.
Kind regards,
Team autoaid
thank you for your request on autoaid.
The following information reached us:
- Opel Insignia Sedan 2.0 CDTI (A20DTC)
- DTC: P2453
A blind diagnosis isn't easy.
The DTC P2453 in the Engine Control Module says, that there is a malfunction of the Differential Pressure Sensor of the Diesel Particulate Filter.
You cannot clear the fault until the problem is fixed.
Possible causes are a faulty or defective Differential Pressure Sensor or a broken cable, a loose contact or poor plug connections as well as corroded connections.
In some cases a software update of the engine control module of the Insignia could solve the problem.
But first I would check the Differential Pressure Sensor.
I hope this information will help you to solve your problem. If you have further questions, just reply to this post.
Kind regards,
Team autoaid
